Instructions | TABS29 Cap Candle | TABS




Original Instructions | TABS29™ Cap Candle
Download or View in PDF. Click here

Item Description
Name: TABS29™
Item code: TABS29/HM
Made in: England

Dear Customer
Whether you’re lighting up the night with friends or savouring a solo moment, we hope your purchase meets your expectations.
Age Suitability
The TABS29 is intended for use by persons 18 years and over.
Product Use
The TABS29 is designed to transform an alcohol beverage bottle into a 'dive bar candle'. This transformation is subject to bottle compatibility.

Caution - Before Use
Its important to read, follow and understand the instructions, as well as the rest of the user guide, before using your TABS29 for the first time.

Bottle Compatibility
Refer to the Bottle Compatibility Information section of the user guide for selecting a bottle, which is not supplied.

Fuel Type
Refer to the Lamp Oil Information section of the user guide for fuel type and buying fuel, which is not supplied.

You Will Need
1 spouted cup/jug. 1 lighter. Water. 1 marker pen. Lamp oil. 1 glass bottle.

*** Notes, Cautions, and Warnings ***
Throughout the user guide, when necessary, we use Notes, Cautions and Warnings to make you aware of safety considerations.
Note: Provides important information for optimal product use.
Caution: Indicates potential product issues or how to avoid them.
Warning: Alerts to potential property damage, personal injury, or serious risk.

 
*** Notes ***

TABS29 & Components
The TABS29 makes a rattling sound; this is intentional.
The German made quality wick never needs trimming.

Setup & Filling
Prepare your empty bottle on a hard, flat surface.
Your bottle only needs to be filled with water once.

How the Fuel Works
A lamp oil refill lasts approximately 4–5 hours.
Lamp oil floats on top of water.
Water and lamp oil will not mix.

Wick & Filling Tips
Always
leave empty space at the top of all bottles.
Do not set the wick higher than the recommended height.
Do not remove the wick material from the wick holder.
Do not allow the wick to touch the water inside the bottle.


GETTING STARTED: 4-Step User Instructions

*** Note ***
The objective is to safely and precisely set the candle wick height, securely attach the removable TABS29 to the bottle, fill the bottle with water, and add the correct amount of fuel.

Step 1 of 4: Inspect and Rinse the Bottle

Bottle Inspection

Hold the bottle up to a light source and inspect it closely from top to bottom for any signs of damage, such as cracks or chips. If you find any damage, however minor, do not use the bottle.

Bottle Rinse
Rinse the inside of the bottle with cold or tepid water. No need to dry the inside afterward.

Step 2 of 4: Set the Wick Height
Setting the correct wick height is essential for a well-functioning candle.

Wick Height
Position the wick inside the wick holder so it extends just 1mm above the holder. This wick height will produce the ideal flame height of approximately 1.5cm. To adjust, gently push or pull the wick from underneath the wick holder.

Caution
Do not exceed a 1mm wick height, as this will cause the flame to stretch and produce smoke. 

Caution
Take care not to pull the wick entirely out of the wick holder when making adjustments.

Refer to the illustration below for guidance.


Step 3 of 4: Placing the TABS29 on the Bottle

TABS29 Placement

Now that the wick height is set, click the TABS29 onto the bottle.

Ensure it meets these criteria

It sits perfectly flat against the bottle mouth. It moves slightly from side to side on the bottle mouth. The wick material is straight.

Mark the Wick Position
Now that the wick is set to the correct height and the TABS29 fits properly on the bottle, follow these steps to mark the wick position on the bottle: With the TABS29 on the bottle, use a marker pen to draw a mark on the outside of the bottle, approximately 2cm below the end of the wick inside. Once marked, remove the TABS29 and set it aside.

Refer to the illustration below for guidance.


Final Step 4 of 4: Fill the Bottle with Water and Lamp Oil

Water Filling
Using a spouted jug or beaker, tilt the bottle slightly and slowly fill it with cold water. Stop filling once the water level reaches the pen mark on the outside of the bottle. Filling slowly and precisely will help ensure success.

Refer to the illustration below for guidance.


Lamp Oil Filling

Add Lamp Oil
 Drip a small amount of lamp oil into the bottle, leaving about a 1cm empty space at the top of the bottle neck.

Check Wick Height
 
Confirm that the wick is set to the correct height within the wick holder, then place the cap candle onto the bottle. Allow 20 seconds for the wick to absorb the lamp oil and then light your Belgium bar candle.

Observe Flame
Observe the flame as it stabilises. Adjust if necessary.

Adjust Wick Height (if necessary)
 
Adjust the wick height to achieve the ideal flame height of around 1.5cm.

Warning

Ensure the TABS29 has fully cooled before adjusting the wick height.

How to Refill the Bottle Neck with Lamp Oil

Prepare Candle

Place the extinguished candle on a hard, flat surface. Remove the TABS29 and set it aside.

Refill
 
Add lamp oil to the bottle neck, again leaving about 2cm of empty space at the top.

Replace TABS29
 
Confirm the wick height is set correctly and return the TABS29 to the bottle.

Warning
Ensure the TABS29 has fully cooled before handling.

*** Notes ***

Empty Space

Leaving empty space at the top of the bottle neck helps the candle breathe properly and function as intended. 

Ideal Flame

The ideal flame burns steady and calm, without stretching or erratic movement. 

Pouring Lamp Oil

For precise pouring, use a small plastic spouted medicine cup or similar type vessel. The smaller the vessel, the easier and more accurate the pour. 

Excess Lamp Oil

If the bottle is overfilled with oil, use a twisted piece of kitchen roll to absorb the excess. Dispose of used kitchen roll safely, out of reach of children and pets.

· End of Instructions ·



 


Pub V1.2.E-EN-E-1558/2 | TABS by Hofzl Metallic © 2026 Copyright


    
▲