Instructions | TABS26 Cap Candle | TABS
Item Description
Name: TABS26™
Item Code: TABS26/HM
Made in: England
Name: TABS26™
Item Code: TABS26/HM
Made in: England
Dear Friend
Whether you’re lighting up the night with friends or savouring a solo moment, we hope your purchase meets your expectations.
Product Use
The TABS26 is designed to transform an alcohol beverage bottle into a 'dive bar candle'. This transformation is subject to bottle compatibility.
Product Age Suitability
This product is intended for use by persons 18 years and over.
Caution-Before Product Use
Read and understand these instructions, as well as the rest of the user guide, before using your TABS26 for the first time.
Read and understand these instructions, as well as the rest of the user guide, before using your TABS26 for the first time.
Bottle Compatibility
Refer to the Bottle Compatibility Information section of the user guide for selecting a bottle, which is not supplied.
Refer to the Bottle Compatibility Information section of the user guide for selecting a bottle, which is not supplied.
Fuel Type
Lamp oil designed for indoor use. Refer to the Lamp Oil Information section of the user guide.
Lamp oil designed for indoor use. Refer to the Lamp Oil Information section of the user guide.
Things You Will Need
1 spouted jug. 1 lighter. Water. 1 marker pen. Lamp oil. 1 glass bottle.
1 spouted jug. 1 lighter. Water. 1 marker pen. Lamp oil. 1 glass bottle.
*** Notes, Cautions, and Warnings ***
Throughout the user guide, when necessary, we use Notes, Cautions and Warnings to make you aware of safety considerations.
Throughout the user guide, when necessary, we use Notes, Cautions and Warnings to make you aware of safety considerations.
Note: Provides important information for optimal product use.
Caution: Indicates potential product issues or how to avoid them.
Warning: Alerts to potential property damage, personal injury, or serious risk.
*** Notes ***
Caution: Indicates potential product issues or how to avoid them.
Warning: Alerts to potential property damage, personal injury, or serious risk.
*** Notes ***
Cap & Components
The TABS26 makes a rattling sound; this is intentional.
The seal on the metal cap has been intentionally removed.
The German made quality wick never needs trimming.
The TABS26 makes a rattling sound; this is intentional.
The seal on the metal cap has been intentionally removed.
The German made quality wick never needs trimming.
Setup & Filling
Prepare your empty glass beer bottle on a hard, flat surface.
Your bottle only needs to be filled with water once.
How the Fuel Works
A lamp oil refill lasts approximately 5 hours.
Lamp oil floats on top of water.
Water and lamp oil will not mix.
A lamp oil refill lasts approximately 5 hours.
Lamp oil floats on top of water.
Water and lamp oil will not mix.
Wick & Filling Tips
Always leave empty space at the top of all bottles.
Do not set the wick higher than the recommended height.
Do not remove the wick material from the wick holder.
Do not allow the wick to touch the water inside the bottle.
GETTING STARTED: 4-Step User Instructions
*** Note ***
The objective is to safely and precisely set the candle wick height, securely attach the removable TABS26 to the bottle, fill the bottle with water, and add the correct amount of fuel.
Step 1 of 4: Inspect and Rinse the Bottle
Bottle Inspection
Hold the bottle up to a light source and inspect it closely from top to bottom for any signs of damage, such as cracks or chips. If you find any damage, however minor, do not use the bottle.
Bottle Rinse
Rinse the inside of the bottle with water. No need to dry the inside afterward.
Step 2 of 4: Set the Wick Height
Setting the correct wick height is essential for a well-functioning dive bar/Belgium bar candle.
Wick Height
Position the wick inside the wick holder so it extends 1mm above the holder. This wick height will produce the ideal flame height of approximately 1.5cm. To adjust, gently push or pull the wick from underneath the wick holder. Refer to the illustration below for guidance.
CAUTION
Do not exceed a 1-2mm wick height, as this will cause the flame to stretch and produce smoke. CAUTION: Take care not to pull the wick entirely out of the wick holder when making adjustments.
Do not exceed a 1-2mm wick height, as this will cause the flame to stretch and produce smoke. CAUTION: Take care not to pull the wick entirely out of the wick holder when making adjustments.
Step 3 of 4: Placing the TABS Cap on the Bottle
TABS Cap Placement
Push the TABS26 onto the bottle. Ensure it meets these criteria: It clicks onto the bottle mouth. It rotates freely around the bottle mouth. It moves slightly up and down on the bottle mouth. It moves slightly from side to side on the bottle mouth.
Testing the TABS Cap's Fit
Gently pull on the TABS26 to check its security. If it remains on the bottle, it is a secure fit. If it comes off, adjustments are needed to make it a tighter fit on the bottle. Follow the instructions below to adjust the TABS26.
Gently pull on the TABS26 to check its security. If it remains on the bottle, it is a secure fit. If it comes off, adjustments are needed to make it a tighter fit on the bottle. Follow the instructions below to adjust the TABS26.
Adjusting the TABS26 (If Necessary)
With the TABS26 on the bottle, use the edge of a coin to gently press in four crimps on the metal cap. Repeat as needed until the TABS26 fits securely but can still be pushed off the bottle firmly with your thumb.
With the TABS26 on the bottle, use the edge of a coin to gently press in four crimps on the metal cap. Repeat as needed until the TABS26 fits securely but can still be pushed off the bottle firmly with your thumb.
Refer to the illustration below for guidance.
After Adjustment
Ensure the TABS Cap still meets these criteria: It clicks onto the bottle mouth. It rotates freely on the bottle mouth. It moves slightly up and down on the bottle mouth. It moves slightly from side to side on the bottle mouth.
Ensure the TABS Cap still meets these criteria: It clicks onto the bottle mouth. It rotates freely on the bottle mouth. It moves slightly up and down on the bottle mouth. It moves slightly from side to side on the bottle mouth.
Mark the Wick Position
Now that the wick is set to the correct height and the cap candle fits properly on the bottle, follow these steps to mark the wick position inside the bottle: With the TABS Cap on the bottle, using a marker pen, draw a mark on the outside of the bottle, approximately 2cm below the end of the wick inside. Once marked, remove the TABS Cap candle by pushing it upward to release it from the bottle, and set it aside.
Now that the wick is set to the correct height and the cap candle fits properly on the bottle, follow these steps to mark the wick position inside the bottle: With the TABS Cap on the bottle, using a marker pen, draw a mark on the outside of the bottle, approximately 2cm below the end of the wick inside. Once marked, remove the TABS Cap candle by pushing it upward to release it from the bottle, and set it aside.
Refer to the illustration below for guidance.
Final Step. Step 4 of 4: Fill the Bottle with Water and Lamp Oil
Water Filling
Using a spouted jug or beaker, tilt the bottle slightly and slowly fill it with water. Stop filling once the water level reaches the pen mark on the outside of the bottle. Filling slowly and precisely will help ensure success.
Water Filling
Using a spouted jug or beaker, tilt the bottle slightly and slowly fill it with water. Stop filling once the water level reaches the pen mark on the outside of the bottle. Filling slowly and precisely will help ensure success.
Refer to the illustration below for guidance.
Lamp Oil Filling
Add Lamp Oil
Drip a small amount of lamp oil into the bottle, leaving about a 1cm empty space at the top of the bottle neck.
Check Wick Height
Confirm that the wick is set to the correct height within the wick holder, then place the cap candle onto the bottle. Allow 20 seconds for the wick to absorb the lamp oil and then light your candle.
Observe Flame
Observe the flame as it stabilises. Adjust if necessary.
Adjust Wick Height (if necessary)
Adjust the wick height to achieve the ideal flame height of around 1.5cm.
Warning: Ensure the TABS Cap has fully cooled before adjusting the wick height.
Adjust the wick height to achieve the ideal flame height of around 1.5cm.
Warning: Ensure the TABS Cap has fully cooled before adjusting the wick height.
How to Refill the Bottle Neck with Lamp Oil
Prepare Candle: Place the extinguished candle on a hard, flat surface. Remove the TABS Cap and set it aside.
Refill
Add lamp oil to the bottle neck, again leaving about 1cm of empty space at the top.
Replace TABS26
Confirm the wick height is set correctly and return the TABS Cap to the bottle.
Refill
Add lamp oil to the bottle neck, again leaving about 1cm of empty space at the top.
Replace TABS26
Confirm the wick height is set correctly and return the TABS Cap to the bottle.
Warning: Ensure the TABS Cap has fully cooled before handling.
*** Notes ***
Empty Space
Leaving empty space at the top of the bottle neck helps the candle breathe properly and function as intended.
Ideal Flame
The ideal flame burns steady and calm, without stretching or erratic movement.
Pouring Lamp Oil
For precise pouring, use a small plastic spouted medicine cup or similar type vessel. The smaller the vessel, the easier and more accurate the pour.
Excess Lamp Oil
If the bottle is overfilled with oil, use a twisted piece of kitchen roll to absorb the excess. Dispose of used kitchen roll safely, out of reach of children and pets.
If the bottle is overfilled with oil, use a twisted piece of kitchen roll to absorb the excess. Dispose of used kitchen roll safely, out of reach of children and pets.
· End of Instructions ·